Wodalife Help Center
Welcome to the Wodalife Help Center. Here you will find answers to the most frequently asked questions from our customers, partners, and professionals.

Your atmospheric water condenser has just arrived.
Congratulations on this great decision: here are the next steps to get off to a good start.

01.
Find the opening face
Look for the yellow “Front” sign. It indicates the front panel, from which you can proceed to open it.
02.
Open the front of the case
Using a Phillips screwdriver, unscrew only the section of the wooden case located on the side with the "Front" signage. It is not necessary to disassemble the other sides: this section opens like a door to allow you access to your atmospheric water condenser.
03.
Remove the cardboard packaging
Slide the cardboard forward out of the wooden crate, cut the seals, then lift the cardboard packaging upwards to reveal your atmospheric water condenser.
Included with your WodaLife, you will find the external water inlet tool, two replacement taps, the blue membrane to insert into the F4 filter, the opening key allowing easy access to its cartridge, as well as a replacement fiber.


.png)


Discover now the steps to follow to start your device and begin producing your Wodalife water.

01.
Install and stabilize the device
Place your device on a flat, stable surface in a well-ventilated area. Upon receipt, it is essential to leave it in an upright position for 12 hours before plugging it in.
02.
Prepare the components before use
At the front of the machine, insert the F4 filter (blue RO membrane) into its cartridge ( see the explanatory video ). Then remove the film from the charcoal sachet located in the lower tank ( see the explanatory video ), as well as the protective cap from the tap.
03.
Connect and secure the machine
Plug the device into a suitable electrical outlet, then lower the wheel brake lever to immobilize the machine in its final position.
And off we go: your WodaLife device is ready to let the water come to life.

